Summit SPR627OS Manuel d'instructions télécharger pdf (Page 9)

INSTALLING THE STAINLESS STEEL HANDLE

This appliance includes a stainless steel handle that is not required to

operate the unit. To install the handle, follow the instructions below:

1. Use a screwdriver to remove the screws on the side of door

where the handle is to be installed.

2. Align the handle with the screws removed in step # 1. Tighten

the screws using a Phillips head screwdriver until the handle is

both flush and secured tightly against the door side. (DO NOT

over-tighten as this will cause damage to the stainless steel door

surface.)

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 44º and

90ºF (7º to 32ºC). If the ambient temperature is above or below the recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions

may cause interior temperatures to fluctuate. The operating temperature range may not be reached.

CONTROL PANEL for FF1532B / SPR316OS / FF64B / FF64BSS / SPR627OS

ON/OFF Power

To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

LIGHT

To control the inner light.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

ºF/ºCSelector

Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from

Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.

Handle

Door

Screw

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Summit SPR627OS Manuel d'instructions Page 9