Summit BIM68OSGDR Manuel

0 INDOOR/OUTDOOR ICE MAKER Models BIM68OSGDR BIM68OSPUMP User’s Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPER

9 Requirements for plumbing Plan the arrangement of the water supply pipes. Connect a 1/4" diameter copper cable with the tap water pipe. Instal

10 Gravity Drain Pipe Model (BIM68OSGDR) Before connecting the drain tube and the water supply pipe with the ice maker, pipes should be arranged as f

11 Drain Pump Model (BIM68OSPUMP) 1) Arrange the ice maker at the front of the installation opening. 2) Adjust the leveling legs to the appropriate

12 What to check prior to installation Follow this process! ● The water supply valve may have different shapes depending on the

13 Changing Door-opening Direction The direction in which the door with fixed hinges opens may be changed. The hinges are attached to the right-hand

14 Installation Checklist Important Information: The installation engineer should check whether any installation part has been omitted and follow the

15 SpecificFeatures Fig. 9: Ice maker  Sink-Mounted Ice Maker  The gravity drain-type naturally drains water, whereas the d

16 Operation Initial operation ① Open the water supply valve connected with the ice maker. ② Insert the plug of the ice maker into the electric out

17 Operation time It takes about 20-35 minutes to produce a batch of 24 ice cubes. The length of one cycle of the ice maker (ice production and ice r

18 Cleaning Cleaning the nozzle / ice slide / water tank 1. Open the door and remove two front injection bolts on the top cover. 2. Pull the

1 Table of Contents Ice Maker Safety ... 2 Important Sa

19 5. Clean the gap of the nozzle frame fixed on the vessel sheet (water tank). 6. Lift the drain projectile inside the vessel sheet (water tank

20 2. Open the front door and remove the filter screens from the bottom of the ice tank and water tank. Water tank Ice tank 3. Rinse the s

21 Cleaning the condenser 1. Remove two screws on the front panel at the center of the inside. 2. Remove dust from the surface of the co

22 Maintenance Maintenance in winter ① Clean the ice-production system. ② Turn off the power. ③ Empty the water container. Remove the pump hose. (Th

23 Specifications CATEGORY UNIT ICE MAKER BIM68OSGDR / BIM68OSPUMP Maximum Ice-Making Capacity※ kg/day 29 lb/day 63.9 Dimensions WxDxH (mm) 3

24 Troubleshooting PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Ice maker does not operate Ice maker is unplugged Plug ice maker in. Breaker tripp

25 Notes

26 Notes

27 For parts and accessory ordering, troubleshooting and helpful hints, visit: www.summitappliance.com/support Limited Warranty ONE-YEAR LIMITED WAR

2 ICE MAKER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on yo

3 IMPORTANT SAFEGUARDS Before the ice maker is used, it must be properly positioned and installed as described in this manual, so

4  It is important for the ice maker to be leveled in order to work properly. Otherwise water may not flow properly through the evaporator (ice mol

5 label on the appliance. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from

6 The mineral content of the ice produced by the ice maker is reduced compared to the content in the water before conversion into ice. Water containi

7 Location of Parts Door handle Door Top cover Water tank Operation switch Front panel Bottom grill FRONT BACK Back cover Water supply socket (in

8 Installation Space requirements for installation When moving the ice maker, check whether the prepared opening dimensions, electric power, and pip