Summit CR424BL Manuel d'utilisateur télécharger pdf (Page 7)

Page 6

Before making the countertop cutout, check for clearance. See if the cooktop will

clear the front and side walls of the base cabinet. It is also important to provide

enough ventilation.

Adequate ventilation of the space below the countertop must be provided to

ensure proper operation of the cooktop. Heat transferred from the cooktop

bottom pan during operation will overheat an improperly ventilated area.

Allow a 2" (51mm) minimum clearance between the bottom of the metal pan of

the cooktop and any combustible surface located below, e.g., the upper edge of

a drawer installed below the cooktop. Failure to provide proper clearances and

ventilation may result in a fire hazard.

Countertop cutout dimensions are shown in the figure below.

Note

: When making the countertop, put a radius at the corners of the cutout (a

radius of ¼" is typical). This will keep the countertop from cracking.

Follow the countertop manufacturer's instructions regarding the minimum

corner radius and reinforcement of corners.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Summit CR424BL Manuel d'utilisateur Page 7