Summit SWC902D Manuel d'utilisation et d'entretien

Write Model and Serial Numbers here: _________________________ _________________________ TWO-ZONE WINE COOLERS Models SWC902D S

9 ● LIGHT Button: This controls the LED cabinet light. NOTE: Once the light is turned on, it will shut off automatically after 10 minutes. ● °C/°

10 To remove or change the position of a shelf Follow the illustrations and instructions below if you wish to take out a shelf: First

11 CARE AND MAINTENANCE Cleaning Your Wine Cooler 1. Turn off the power, unplug the appliance, and remove all items including shelves an

12 PROBLEMS WITH YOUR WINE COOLER You can solve many common wine cooler problems easily, saving you the cost of a possible service call. Try the

13 NOTES

14 NOTES

15 LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is

1 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electrical shock or injury when using your appliance, foll

2  Although the unit has been tested at the factory, due to transit and storage, you should clean the appliance before use.  Do not use solvent-b

3 TABLE OF CONTENTS Important Safety Instructions ... 1 – 2 Location of Parts

4 LOCATION OF PARTS NOTE: Each zone has a Ventilation fan and a Sensor located on the rear wall. An Active carbon filter is i

5 INSTALLATION INSTRUCTIONS Before Using Your Wine Cooler Remove the exterior and interior packing. Before connecting the wine cooler to the powe

6

7 NOTE: All parts removed must be saved to allow the door swing to be reversed. 1. Carefully use a sharp tool to pry up the decorative

8 OPERATING YOUR WINE COOLER The wine cooler should be placed where the ambient temperature is between 61 and 95 degrees Fahrenheit (16-35°C). I